Product
|
|
1) Universal jet trolley for washing narrow-neckedglassware, round bottom flasks and measuring cyliders. Eight different sizes of interchangeable nozzles. Maximum capacity 40 items. |
|
2) Available in the following versions : 6% and 12% butyrometer nozzle, pipette nozzle, nozzles for glassware with the following height measurements : 90, 110, 140, 160, 180, 220, 240, 260 mm.
|
|
3) The Accessories used on drying system models (Quick drying system using forced air) are identified by the DS suffix showing that the accessories include a connection for air injection through the trolley water circuit. |
|
4) Two-level trolley for washing narrow-necked glassware by internal injection. Capacity 68 items, for glassware with a maximum height of 225mm. Standard equipment includes 140mm height nozzles
DS : two-level flask washer with drying system connection (not shown) |
|
5) Universal flask washing trolley with 20 nozzles on half the trolley. The other half is free for a mixed load and can contain a 1/2 basket accessory.
DS : Version with drying system connection(not shown) |
|
6) Injection washing trolley for both pipettes and flasks. It has 20 positions for pipettes with height measurements of up to 550 mm and 20 positions for narrow-necked glassware with a maximum height of 49 cm.
DS : Flask/pipette trolley with drying system connection (not shown) |
|
7) Trolley for washing narrow-necked glassware by internal injection. It is positioned on the top level of the machine. Capacity 40 items for glassware with a maxium height of 225 mm. Standard equipment includes 140 mm height nozzles.
DS : Version with drying system connection (see photo) |
|
8) Special trolley for washing large bottles, flasks and beakers with a maximum height of 49cm.It has a support to hold 8 bottles/ flasks. Supplied with special nozzles. |
|
9) Trolley with 20 nozzles able to wash the inside of 5-way reactors and narrownecked glassware. Supplied with twenty 220 mm long nozzles.
DS : version with drying system connection (not shown). |
|
10) Trolley for washing 12 Fischer bottles and graduated cylinders of maximum height 55cm. Complete with 6 positions for injection washing of narrow-necked glassware. |
|
11)
Injection trolley for bottles for microbiological and pharmaceutical use. Available in 6 versions:
¨çLower trolley for 16bottles greater than 1 litre with maximum height of 450mm.
¨èVersion with drying system connection.
¨éUpper trolley for 16 standard bottles up to 1 litre, with maximum height of 245 mm diam.101 mm.
¨êVersion with drying system connection.
¨ëTwo level trolley for 32 standard bottles up to 1 litre with, maximum height of 245 mm diam. 101 mm
¨ìVersion with drying system connection. |
|
|
12) Trolley for washing volumetric pipettes measuring up to 55 cm in length. It has 20 positions for 55 cm long pipettes and 20 positions for 45~49 cm pipettes.
DS : pipette washer trolley. Version with drying system connection (not shown). |
|
13) Trolley for washing tapering and straight test tubes by internal injection. Max. capacity 100 test tubes. The trolley must be set in the top washing level.
DS : version with drying system connection (not shown). |
|
14) Two-level trolley for washing tapering and straight test tubes by internal injection. Max. capacity 200 test tubes.
DS : version with drying system connection (not shown). |
|
15) Accessory to wash 100 pipettes with 1 to 20 ml capacities and height of up to 450mm.The pipette disk must be fitted onto a trolley for quick loading and unloading access.
DS : version with drying system connection (not shown). |